dmesg - Intel Core i7-4600M - Intel Gen7 Mobile - Notebook

Return To Intel Core i7-4600M - Intel Gen7 Mobile - Notebook System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cb67ffff] usable
BIOS-e820: [mem 0x00000000cb680000-0x00000000cb686fff] ACPI NVS
BIOS-e820: [mem 0x00000000cb687000-0x00000000cbe75fff] usable
BIOS-e820: [mem 0x00000000cbe76000-0x00000000cc103fff] reserved
BIOS-e820: [mem 0x00000000cc104000-0x00000000db508fff] usable
BIOS-e820: [mem 0x00000000db509000-0x00000000db83dfff] reserved
BIOS-e820: [mem 0x00000000db83e000-0x00000000db89dfff] usable
BIOS-e820: [mem 0x00000000db89e000-0x00000000db9cbfff] ACPI NVS
BIOS-e820: [mem 0x00000000db9cc000-0x00000000dbf85fff] reserved
BIOS-e820: [mem 0x00000000dbf86000-0x00000000dbffefff] type 20
BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI 2.0=0xdb9a2000  ACPI=0xdb9a2000  SMBIOS=0xdbf84598 
efi: mem00: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000058000) (0MB)
efi: mem01: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem02: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
efi: mem03: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
efi: mem04: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3e000) (14MB)
efi: mem05: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000f3e000-0x0000000037938000) (873MB)
efi: mem06: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000037938000-0x0000000037c94000) (3MB)
efi: mem07: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000037c94000-0x0000000091f1e000) (1442MB)
efi: mem08: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000091f1e000-0x00000000c8222000) (867MB)
efi: mem09: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000c8222000-0x00000000cb659000) (52MB)
efi: mem10: [Loader Code        |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cb659000-0x00000000cb680000) (0MB)
efi: mem11: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cb680000-0x00000000cb687000) (0MB)
efi: mem12: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cb687000-0x00000000cb7d9000) (1MB)
efi: mem13: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cb7d9000-0x00000000cbe36000) (6MB)
efi: mem14: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cbe36000-0x00000000cbe53000) (0MB)
efi: mem15: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cbe53000-0x00000000cbe6d000) (0MB)
efi: mem16: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cbe6d000-0x00000000cbe76000) (0MB)
efi: mem17: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x00000000cbe76000-0x00000000cc104000) (2MB)
efi: mem18: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cc104000-0x00000000cc112000) (0MB)
efi: mem19: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000cc112000-0x00000000d8aed000) (201MB)
efi: mem20: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8aed000-0x00000000d8ebf000) (3MB)
efi: mem21: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8ebf000-0x00000000d8f0e000) (0MB)
efi: mem22: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8f0e000-0x00000000d8fa1000) (0MB)
efi: mem23: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8fa1000-0x00000000d8fa7000) (0MB)
efi: mem24: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8fa7000-0x00000000d8fce000) (0MB)
efi: mem25: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8fce000-0x00000000d8fcf000) (0MB)
efi: mem26: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8fcf000-0x00000000d8fee000) (0MB)
efi: mem27: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8fee000-0x00000000d8ff5000) (0MB)
efi: mem28: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000d8ff5000-0x00000000da972000) (25MB)
efi: mem29: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000da972000-0x00000000db297000) (9MB)
efi: mem30: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db297000-0x00000000db509000) (2MB)
efi: mem31: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db509000-0x00000000db5bc000) (0MB)
efi: mem32: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db5bc000-0x00000000db83e000) (2MB)
efi: mem33: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db83e000-0x00000000db894000) (0MB)
efi: mem34: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db894000-0x00000000db89e000) (0MB)
efi: mem35: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db89e000-0x00000000db9b9000) (1MB)
efi: mem36: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db9b9000-0x00000000db9c0000) (0MB)
efi: mem37: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000db9c0000-0x00000000db9cc000) (0MB)
efi: mem38: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x00000000db9cc000-0x00000000dbd7a000) (3MB)
efi: mem39: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x00000000dbd7a000-0x00000000dbf86000) (2MB)
efi: mem40: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x00000000dbf86000-0x00000000dbf9e000) (0MB)
efi: mem41: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x00000000dbf9e000-0x00000000dbfff000) (0MB)
efi: mem42: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000dbfff000-0x00000000dc000000) (0MB)
efi: mem43: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000100000000-0x000000011fe00000) (510MB)
efi: mem44: [Reserved           |   |  |  |  |   |  |  |  |  ] range=[0x00000000dd000000-0x00000000df200000) (34MB)
efi: mem45: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem46: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem47: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem48: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem49: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem50: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: Notebook                         W65_67SZ                        /W65_67SZ                        , BIOS 1.03.03 12/04/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F00000000 write-back
  1 base 0100000000 mask 7FE0000000 write-back
  2 base 00E0000000 mask 7FE0000000 uncachable
  3 base 00DE000000 mask 7FFE000000 uncachable
  4 base 00DD000000 mask 7FFF000000 uncachable
  5 base 011FE00000 mask 7FFFE00000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01b32000, 0x01b32fff] PGTABLE
BRK [0x01b33000, 0x01b33fff] PGTABLE
BRK [0x01b34000, 0x01b34fff] PGTABLE
init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
 [mem 0x11fc00000-0x11fdfffff] page 2M
BRK [0x01b35000, 0x01b35fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11fbfffff]
 [mem 0x100000000-0x11fbfffff] page 2M
init_memory_mapping: [mem 0xc0000000-0xcb67ffff]
 [mem 0xc0000000-0xcb5fffff] page 2M
 [mem 0xcb600000-0xcb67ffff] page 4k
BRK [0x01b36000, 0x01b36fff] PGTABLE
BRK [0x01b37000, 0x01b37fff] PGTABLE
init_memory_mapping: [mem 0xcb687000-0xcbe75fff]
 [mem 0xcb687000-0xcb7fffff] page 4k
 [mem 0xcb800000-0xcbdfffff] page 2M
 [mem 0xcbe00000-0xcbe75fff] page 4k
init_memory_mapping: [mem 0xcc104000-0xdb508fff]
 [mem 0xcc104000-0xcc1fffff] page 4k
 [mem 0xcc200000-0xdb3fffff] page 2M
 [mem 0xdb400000-0xdb508fff] page 4k
init_memory_mapping: [mem 0xdb83e000-0xdb89dfff]
 [mem 0xdb83e000-0xdb89dfff] page 4k
init_memory_mapping: [mem 0xdbfff000-0xdbffffff]
 [mem 0xdbfff000-0xdbffffff] page 4k
init_memory_mapping: [mem 0x00100000-0xbfffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
RAMDISK: [mem 0x37938000-0x37c93fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DB9A2000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DB9A2088 000094 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DB9AEEB8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DB9A21B8 00CCFD (v02 ALASKA A M I    00000024 INTL 20091112)
ACPI: FACS 0x00000000DB9CA080 000040
ACPI: APIC 0x00000000DB9AEFC8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DB9AF040 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: ASF! 0x00000000DB9AF088 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000DB9AF130 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DB9B00C8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000DB9B0608 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: MCFG 0x00000000DB9B10E0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x00000000DB9B1120 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DB9B1158 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DB9B1470 001BFB (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
ACPI: SSDT 0x00000000DB9B3070 000EA8 (v01 SgRef  SgPeg    00001000 INTL 20091112)
ACPI: DMAR 0x00000000DB9B3F18 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
ACPI: BGRT 0x00000000DB9B3FD0 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
NODE_DATA(0) allocated [mem 0x11fdf7000-0x11fdfafff]
 [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x11fdfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00057fff]
  node   0: [mem 0x00059000-0x0009dfff]
  node   0: [mem 0x00100000-0xcb67ffff]
  node   0: [mem 0xcb687000-0xcbe75fff]
  node   0: [mem 0xcc104000-0xdb508fff]
  node   0: [mem 0xdb83e000-0xdb89dfff]
  node   0: [mem 0xdbfff000-0xdbffffff]
  node   0: [mem 0x100000000-0x11fdfffff]
Initmem setup node 0 [mem 0x00001000-0x11fdfffff]
On node 0 totalpages: 1028209
  DMA zone: 64 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 13964 pages used for memmap
  DMA32 zone: 893653 pages, LIFO batch:31
  Normal zone: 2040 pages used for memmap
  Normal zone: 130560 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcb680000-0xcb686fff]
PM: Registered nosave memory: [mem 0xcbe76000-0xcc103fff]
PM: Registered nosave memory: [mem 0xdb509000-0xdb83dfff]
PM: Registered nosave memory: [mem 0xdb89e000-0xdb9cbfff]
PM: Registered nosave memory: [mem 0xdb9cc000-0xdbf85fff]
PM: Registered nosave memory: [mem 0xdbf86000-0xdbffefff]
PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88011fa00000 s86336 r8192 d32448 u524288
pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012119
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3923880K/4112836K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 188956K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2893.367 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5789.84 BogoMIPS (lpj=9644556)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
               ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
               Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 21171 entries in 83 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000dbea9000 end: 0x000000dbeb7fff
dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23156.39 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcb680000-0xcb686fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdb89e000-0xdb9cbfff] (1236992 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:15:38, date: 04/10/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A0A0800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A002800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A04EA00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.2: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:04:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:04:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:04:00.2: supports D1 D2
pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcb680000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcbe76000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdb509000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb89e000-0xdbffffff]
e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x1c00-0x1cfe] has been reserved
system 00:01: [io  0x1d00-0x1dfe] has been reserved
system 00:01: [io  0x1e00-0x1efe] has been reserved
system 00:01: [io  0x1f00-0x1ffe] has been reserved
system 00:01: [io  0x1800-0x18fe] could not be reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x3322-0x3323] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7ffe000-0xf7ffefff] has been reserved
system 00:07: [mem 0xf7fe0000-0xf7fe0fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3440K (ffff880037938000 - ffff880037c94000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd4aed000-0xd8aed000] (64MB) mapped at [ffff8800d4aed000-ffff8800d8aecfff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
  Magic number: 11:622:276
tty tty13: hash matches
rtc_cmos 00:02: setting system clock to 2015-04-10 11:15:38 UTC (1428664538)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
random: systemd-tmpfile urandom read with 1 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
serio: i8042 AUX0 port at 0x60,0x64 irq 12
SCSI subsystem initialized
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
rtsx_pci 0000:04:00.0: enabling device (0000 -> 0002)
rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27
libata version 3.00 loaded.
usbcore: registered new device driver usb
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x35 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst 
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 28
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a200 irq 28
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 28
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1.00: ATAPI: TSSTcorp CDDVDW SN-208DB, TC01, max UDMA/100
ata1.00: configured for UDMA/100
usb 2-1: new high-speed USB device number 2 using ehci-pci
scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208DB  TC01 PQ: 0 ANSI: 5
usb 3-6: new high-speed USB device number 2 using xhci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 3-6:1.0: USB hub found
hub 3-6:1.0: 4 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
usb 3-7: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2893.300 MHz
usb 3-6.3: new low-speed USB device number 4 using xhci_hcd
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-9: TS128GMSA370, N1114H, max UDMA/133
ata5.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      TS128GMSA370     4H   PQ: 0 ANSI: 5
usb 3-6.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/0003:15D9:0A4C.0001/input/input5
hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-6.3/input0
usb 3-8: new high-speed USB device number 5 using xhci_hcd
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATA-8: WDC WD3200BEKT-08PVMT1, 02.01A02, max UDMA/133
ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-0 1A02 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
 sdb: sdb1 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
raid6: sse2x1   10197 MB/s
usb 3-6.4: new full-speed USB device number 6 using xhci_hcd
raid6: sse2x2   13998 MB/s
usb 3-6.4: ep 0x84 - rounding interval to 64 microframes, ep desc says 120 microframes
usb 3-6.4: ep 0x1 - rounding interval to 16 microframes, ep desc says 24 microframes
input: CATEX TECH. Tiny87 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.4/3-6.4:1.0/0003:0483:5018.0002/input/input6
raid6: sse2x4   16586 MB/s
hid-generic 0003:0483:5018.0002: input,hidraw1: USB HID v1.10 Keyboard [CATEX TECH. Tiny87] on usb-0000:00:14.0-6.4/input0
hid-generic 0003:0483:5018.0003: hiddev0,hidraw2: USB HID v1.00 Device [CATEX TECH. Tiny87] on usb-0000:00:14.0-6.4/input1
input: CATEX TECH. Tiny87 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.4/3-6.4:1.2/0003:0483:5018.0004/input/input7
raid6: avx2x1   21812 MB/s
hid-generic 0003:0483:5018.0004: input,hidraw3: USB HID v1.10 Mouse [CATEX TECH. Tiny87] on usb-0000:00:14.0-6.4/input2
raid6: avx2x2   25567 MB/s
raid6: avx2x4   29391 MB/s
raid6: using algorithm avx2x4 (29391 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 34341.600 MB/sec
Btrfs loaded
BTRFS: device fsid a39c4c1e-45db-40bd-999e-dae6e080f455 devid 1 transid 126 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
Switched to clocksource tsc
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
BTRFS info (device sda2): turning on discard
BTRFS info (device sda2): disk space caching is enabled
systemd-journald[179]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
ACPI: Power Button [PWRF]
EDAC ie31200: No ECC support
ACPI: AC Adapter [AC] (on-line)
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (14 C)
wmi: Mapper loaded
media: Linux media interface: v0.10
mousedev: PS/2 mouse device common for all mice
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sound hdaudioC1D0: autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    mono: mono_out=0x0
sound hdaudioC1D0:    inputs:
sound hdaudioC1D0:      Mic=0x2b
sound hdaudioC1D0:      Internal Mic=0x29
ACPI: Battery Slot [BAT0] (battery present)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90000666000, 00:90:f5:ee:da:90, XID 08800800 IRQ 32
r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
input: PC Speaker as /devices/platform/pcspkr/input/input15
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0400)
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 0000:04:00.2 enp4s0f2: renamed from eth0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Adding 4194300k swap on /dev/sdb3.  Priority:-1 extents:1 across:4194300k FS
ath9k 0000:03:00.0: enabling device (0000 -> 0002)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sdb1): Mounting V4 Filesystem
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900048c0000, irq=18
ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
XFS (sdb1): Ending clean mount
random: nonblocking pool is initialized
r8169 0000:04:00.2 enp4s0f2: link down
psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input16
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
wlp3s0: authenticate with 3c:46:d8:1a:19:62
wlp3s0: send auth to 3c:46:d8:1a:19:62 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 3c:46:d8:1a:19:62 (try 1/3)
wlp3s0: RX AssocResp from 3c:46:d8:1a:19:62 (capab=0x431 status=0 aid=2)
wlp3s0: associated

Return To Intel Core i7-4600M - Intel Gen7 Mobile - Notebook System Information